주요 콘텐츠로 건너뛰기

Apple 주문 번호 MC007LL/A / 27" 2560x1440 픽셀 화면

78 질문 전체 보기

My beautiful monitor, in pieces, hinge froze, removed, cannot get back

Hinge froze, disassembled monitor with new hinge in hand, possibly a part that has NEVER, EVER been documented! Wasn’t there a recall????

Block Image

New hinge placed where the old one was, I can snake around all the little cords, but do I have the hinge……right? and how the !&&* to snake the base in and ‘set’ properly on ?? funtimes……

The backfill; Monitor would not come back up after disconnected from power. pple started a process to replace/repair it and then I got a cancer diagnosis, 5 years later after a divorce move and an asset sale, I took the VESA adaptor off and the hinge promply slapped back inside the monitor. I started the process to fix it, gothere, got a hinge and played with said hinge on the base for awhile and found it’s best alignment, put the hinge into the display backwards to force more of the hinge out the back of the monitor. Attached display and BOOM it came up ;) . Still shi*scared to unplug it, I mean it’s always come back after being ‘off current’ for at least 3 days. but I’m familiar with the guts now that I could replace any of the boards inside.

Block Image

After working with it a few times over the weekend.

The best, most readable display I’ve EVER sat in front of. I could NOT ask Apple to repair, even though the delay wasn’t my choice or fault, they shouldn’t bleed after that long!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 2개

How about more details on what the exact issue is, maybe a pic or two 기존 질문에 이미지 추가하기

Happy it all worked out

댓글 달기

답변 1개

선택된 답변

I think I get the gist what you are having problems with. Reading your question sideways and with a mirror ;-}

The question is how do I attach the foot to the hinge - Correct??

There is a spring catch that you needed to push aside to gain access to the screws to take the foot off. You need to reverse this same approach to lower the hinge plate down to then gain access to the tang to screw the foot back on.

Watch this to see how you need to release the catch Apple IMac VESA Mount Adapter Install Tutorial

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

michael Davis 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 5

전체 시간: 89