주요 콘텐츠로 건너뛰기

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1199 질문 전체 보기

Face-Id and cameras not working after screen replacement

I have a problem after swapping screens. Swapped Sensor bar on display also. The display is an original from another X.

But Face ID could not be activated on this iphone. Proximity and Ambient sensors work fine. But no face ID. Also both cameras not working properly. When I open camera app…there is a black screen and app freezes. Sometimes the cameras begin to work for 5min. Replaced rear camera but remains the same.

Anyone a solution? thx

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 4개

Best guess is that you have damaged or not aligned the connection properly . Try to open the connector and check under microscope or good magnifier both sides . if it looks good reconnect

REMEMBER

Push connector from each end not the middle as this can damage the connector

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

Thanks, will check it. But why does neither the rear camera work. Also I got "no audio device found" on Voice Record app.

Sensors of screen are all working...ok I don't know if the flood illuminator works...is there a way to test ?

Let me have a look at the schematics Ill get back to you by tomorrow It might all route through a different connector

this would be nice ;)

댓글 달기

Try out the below solutions:

Solution #1: Reset Face ID

It will wipe out all the existing mathematical representations of your face, and you will have to set it up all over again.

Solution #2: Reset All Settings

I know you don’t want to see this unwanted solution, when some problems seem to become a headache, don’t hesitate to give it a go.

Solution #3: Update Your iPhone to the Latest iOS Version

Now is the time to go for the software update. Needless to mention that it’s become the biggest troubleshooter in recent times.

 If Nothing Works contact apple support to help you out and get rid of this problem…

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Reset everything was the first thing done...but thx ;) !

This would work if cameras were working still . Unplug cameras and check connections

댓글 달기

same problem but when I replaced back screen

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Jc v1s programmer. for iPhone. worth £120 I paid for it. I done 11 pro and it worked and no messages pop up saying this is not original screen

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

BenjaminS 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,250