Lucy Smith

It is not possible to use SATA to connect two computers together, mainly because it is a host/device topology. This means the host sends a special "host-to-device" command, and the device sends different "device-to-host" commands back. It would be possible to connect two computers using SATA with your special SATA translator device in the middle just like USB cables .You can't connect two computers together with a bare USB cable, because they are both hosts with no devices to talk to.

Well, the real problem is you have used an aftermarket (fake) back off ebay. They do not come with that hole predrilled. So it could not screw the sim ejector in. It can be done it just needs to heat the screw so it will make the hole.

Try out the below solutions: Solution #1: Reset Face ID It will wipe out all the existing mathematical representations of your face, and you will have to set it up all over again. Solution #2: Reset All Settings I know you don’t want to see this unwanted solution, when some problems seem to become a headache, don’t hesitate to give it a go. Solution #3: Update Your iPhone to the Latest iOS Version Now is the time to go for the software update. Needless to mention that it’s become the biggest troubleshooter in recent times.  If Nothing Works contact apple support to help you out and get rid of this problem…

Just go to settings and choose factory reset option. Follow the instructions and your problem will be solved…