기기를 수리하세요 커뮤니티 상점

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1502 질문 전체 보기

옵션

White screen of death!

hi,

I'm having the same problem, like in this topic: White screen after repair

same description.

When I power it on, I never get the apple logo, and it goes right to a white screen. If I hit the power/lock button it will go black screen. Hit it again and white screen. The mute toggle works (phone will vibrate), and iTunes recognizes the iPhone just fine. Holding home button will bring up voice control. I have tried a new LCD and digitizer's, and same symptoms.

I have restored the firmware twice using iOS 4.1 and 4.2.1, but keeps same white screen

thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

You need to look at the connector 1 for LCD, it may be damaged or dirty. Try turning phone off, reopen and clean the connectors. Make sure that the pins that connect to the flex aren't damaged and that all the pins are soldered to the motherboard. Any damage may mean that you will need to replace that connector..an extremely tricky job most of us don't have the tools for. Have a look online to see if there is anyone near you who offers this kind of repair/search ebay/google or pop in to your local phone repair shop. You can buy the connector fairly cheaply and ask an electrical/computer repair shop if they are able to do it.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 6개:

thanks, I haven't tried that, cuz the connector looks clean, but anyway i ll do it, Im going to use Isopropyl alcohol, is it good for cleaning it ?

thank you again

의

hi, I want to let you guys now the solution

I was able to fix this by replacing the board connector 1 / LCD connector

thank you!!

의

Glad we could help, Carlos! Be sure to accept Pollytintop's answer!

의

Hi, what do you mean you replaced connector 1? Did you solder on a new connector? Did you do it yourself or get someone else to do it? I would never dare to do that kind of work so I would like to know who does such things.

의

hi, yes I did solder a new connector, to do so, I thought "this phone is 50% working, so I won't lose anything trying to fix it" :D

I bought the new connector from ebay, then I borrowed a heat gun and followed these videos on youtube.com

to remove the old and damaged connector

http://www.youtube.com/watch?v=AxYhF6Ab2...

to solder the new one, I watched around 10 different videos to feel prepared ;)

http://www.youtube.com/watch?v=c_Qt5CtUl...

http://www.youtube.com/watch?v=yhhLyxkTV...

http://www.youtube.com/watch?v=TN6vNU0Pf...

you can also look up more videos about this kind of soldering by "reflow solder", "Hot-Air Soldering".. etc..

의

댓글 1개 더보기

댓글 달기

옵션

WHITE SCREE OF DEATH SOLVED

I TESTED IT MY SELF WHEN I FOUND MY PHONE IN WHITE SCREEN OF DEATH ....NO UPDATES...NO SOFTWARE VERSION DETECTED ETC... NO RESPONSE...JUST WHITE SCREEN

SOLUTION IS SIMPLE

1. OPEN THE IPHONE 3GS

2. VIDEOS AT YOU TUBE TO OPEN TILL YOU DISCONNECT THE BATTERY

3. LEAVE THE PHONE OPEN FOR ONE HOUR

4. NOW CLOSE IN SAME SEQUENCE

5. UPDATE OR RESTORE CUSTOM 5.1.1

6. THERE IT IS SOLVED

7. PRAY FOR ME

8. FOR ANY QUERY CONTACT AT yourfahad@gmail.com

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

How would I repair my phone if the phone is fully functional, but its just a white screen and I can’t see the front icons. The front screen glass is completely cracked too. New LCD needed? Can someone help?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Carlos 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 14

전체 시간: 10,912