주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2510 질문 전체 보기

Home Button not working

Hi after I succesfully replaced the screen on my Iphone 6s I closed up my Iphone and powered it on. Display was fine but when I unlocked my phone I got a message saying “touch id is unavailable” I opened up settings and went to sucurity and tried to enter a new fingerprint in and I got a error message saying Touch ID is unavailable I went to exit settings and saw that the home button doesn’t respond to being clicked at all i swapped back my old screen to see if the IFIXIT screen was faulty and the home button still didn’t work im stumped I hope somebody is able to help me wih this I really don’t want to have to go to apple and pay there ridiculous prices. Help would be greatly appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

선택된 해법

Hey. First,did you disconnect the battery prior to the repair?

Is the home button flex torn? Did you check it with a magnifying glass? This is beyond common to happen. It can tear so easily. When you lift it from the original adhesive,it can tear. This may have happened. Or if you were rough with it,the flex could have bent too much,or the fpc connector could have been damaged.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Hi thank you for your reply I did dissconnect the battery but I most likely did damage it I just didn't know if this was a software problem or a hardware problem. Thank you for the reply

No problem.

It is probably a hardware problem. There are people who can microsolder home button flex cables...but it isn’t usually worth the cost unless it’s an iPhone 8 or something.

Just make sure you’re connecting the flex cable in the correct orientation.

의견 추가하세요

귀하의 답변을 추가하십시오

Lachlan Ketland 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 5

전체 시간: 150