주요 콘텐츠로 건너뛰기

The TI-84 Plus CE is a graphing calculator released in Spring 2015 by Texas Instruments. It includes a 2.8 inch color screen, USB port, apps, storage, and a 1200 mAh battery.

82 질문 전체 보기

My screen is all white.

It can be charged and turned on and off. However, it stays at a fully white screen. I have already tried pressing the reset button behind but it just turns the screen off. I spilled a tiny bit of water on it yesterday and discovered it today. Is it water damage?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

This does sound like water damage so immediately stop charging the calculator and remove the battery! That way you can avoid accidentally shorting out the calculator and permanently breaking it (I’m hoping that white screen is a software error that can be fixed later). Remove the back cover of the calculator using the teardown guide and dry off the PCB as best you can (make sure to get underneath the aluminum foil). If your calculator isn’t under warranty, then you can go ahead and break the heat melted bits holding the PCB to the front shell. That way you can make sure the front of the PCB, the rubber membrane, and all the buttons are dry.

I’m not an expert at water damage so I would appreciate some guidance from the iFixit community for the following steps.

(As I said above, I’m no expert so this next step may be unnecessary, but it won’t hurt the calculator to do it anyways) From there you should clean everything with at minimum 91% isopropyl alcohol (aka rubbing alcohol) (higher percents are better). Then you should stick everything in rice for several days so any water has time to evaporate. After several days, you can take everything out and just to be safe, clean it all again with the isopropyl alcohol.

Once you’ve put everything back together (let me know if you need help with that), then you can put the battery back in and try to turn it on. If you still get a white screen, try some TI-84 Plus CE Recovery Techniques. If it still doesn’t work properly even after trying that guide, let me know and I’ll have you try some troubleshooting techniques to see if it’s hardware damage.

TI-84 Plus CE Battery 이미지

안내서

Texas Instruments TI-84 Plus CE Battery Replacement

난이도:

쉬움

1 - 5 minutes

TI-84 Plus CE 이미지

안내서

TI-84 Plus CE Recovery Techniques.

난이도:

쉬움

5 seconds - 10 minutes

TI-84 Plus CE 이미지

안내서

TI-84 Plus CE Teardown

난이도:

운영

40 minutes

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Hi Lastmillenial saw this post of yours and I seem to have the same problem with my son’s caculator. I ran through the steps you already provided but no luck, still a white screen b.o. water damage. Is there a way to determine if it’s a hardware issue? Thanks a lot from the Netherlands ?

댓글 달기

귀하의 답변을 추가하세요

kaster hood 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 9

30일 전: 29

전체 시간: 1,052