기기를 수리하세요 커뮤니티 상점

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

904 질문 전체 보기

옵션

Replaced headphone jack -how does the ribbon attach to the plastic tab

Taken apart my ipod as per instructions, all good except cant get the headphone jack ribbon to connect to lift up plastic tab. There doesn’t seem to be any clamp on it to hold the ribbon in place.

I don’t think anything broke off on removal, Old ribbon looks the same as new one.

Be grateful for any advice on how to secure the ribbon and ensure good contact.

many thanks

martin

pictures added showing orange tab in up and down position

Block Image

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@mjw01 there has to be a plastic tab that gets flipped up to disconnect and pressed down the reconnect the cable.

Block Image

Check to see if it is in the down position. If it is not then it is missing. Post some good pictures of the connector with your QUESTION so we can see what you see 기존 질문에 이미지 추가하기

Update (11/15/2019)

@mjw01 okay so just checked one of my boards and looks the same.

Tab open

Block Image

Tab closed

Block Image

All you would have to do is to insert the ribbon cables between the tab and the connector and close the tab

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 2개:

Thanks for the reply, photos now added

의

Thanks @oldturkey03 appreciate the help. I agree it looks the same but the tab doesn’t seem to hold in place when it is closed and I’m worried the connection won’t be made.

I’ll have a go and test it before I close it up. Any other suggestions welcome! (tape the connector in the closed position ?)

의

댓글 달기

귀하의 답변을 추가하세요

Martin whitchurch 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 6

전체 시간: 57