Jacuzzi Hotub J1000 Control Panel is Off and Interior LEDS Flashing

Question

온수 욕조

온수 욕조는, 때로 스파 또는 자쿠지라고 불림, 마사지용 jets/물줄기가 있는 욕조입니다.

35 질문 전체 보기

Eric @papavelo

평판: 1

게시일: 2019년 12월 21일

옵션

Jacuzzi Hotub J1000 Control Panel is Off and Interior LEDS Flashing

We have a Jacuzzi J480 Hotub that is no longer operating. The J1000 Control Panel (#6600-857) is completely dark and the interior tub LEDs are flashing. Does anyone have any ideas what this means or have a technician’s manual? (please don’t send me the Home Owner Jacuzzi® Hot Tubs J-400 Error Conditions/ Error Messages as these don’t help).

Any guidance is greatly appreciated. I’m an EE so I’m pretty comfortable with my Fluke VM and wiring in electrical equipment.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

jayeff @jayeff 평판: 449.8k 11 367 1.4k · Answer 1 · 2019-12-22T01:35:06-07:00

가장 유용한 답변

jayeff @jayeff

평판: 449.8k

11

367

1.4k

게시일: 2019년 12월 22일

옵션

Hi @papavelo ,

Don’t know the answer but here’s the 2010+ J400 Standard Troubleshooting Approach Manual. Hopefully it is not the one that you said not to post. Not exactly the same model unless they mean the J400 series. It also uses the J1000 control panel, so perhaps it is close enough to be of some help.

Given that the panel is “off” the first thing to check is that you have the required power supplied to the setup.

They make a point of saying that 208V will not work, and that 240V is required.

If the supplied power is OK then on p.28 it shows how to troubleshoot without the control panel.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 달기

온수 욕조

Jacuzzi Hotub J1000 Control Panel is Off and Interior LEDS Flashing

답변 1개

귀하의 답변을 추가하세요