기기를 수리하세요 커뮤니티 상점

닌텐도 스위치는 도킹 스테이션을 통해 TV에서 플레이하거나 이동 중에도 플레이할 수 있는 휴대용 게임 콘솔입니다. 2017년 3월 3일 출시되었습니다.

704 질문 전체 보기

옵션

Missing resistor near charging port

Hi.

Sorry if this has been asked before or if I'm posting in the wrong section.

Just wanted to ask if anyone can tell me what the 2R2 634f is what the value of the resistor near next to it is. I've circled them in purple.

Pic attached.

Block Image

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

It is a Signal Transformer, some call it a power inductor. The one you need is part # SCIHP0420TB-2R2

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Thanks Ric. Would you happen to know the value of the resistor next to it?

의

댓글 달기

옵션

2R2 634F is NS motherboard power inductor Big coil components check this http://egamephone.com/index.php?rt=produ...

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 3개:

My switch stopped charging, the battery was draining, and the charging symbol was there, but the battery kept draining. I bought a battery to replace the old one, and when I opened up the switch, this piece was just laying there. What would cause it to break off, and is this the reason my switch isn’t charging?

의

@Michael - Same here. Came in not charging or powering on. Powered up with an new battery and would charge if the battery had some juice. Would not charge a dead battery though. I noticed the 2R2 inductor had come undone. Soldered another one from a dead Switch mobo and it works fine now.

의

@ACE How did you manage to solder another inductor on with the pads on the underside? Did you have to use hot air?

의

댓글 달기

옵션

There is no photo attached.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Sorry must have missed it. Its uploaded now.

Thanks

의

댓글 달기

귀하의 답변을 추가하세요

email ko 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 13

전체 시간: 1,863