6 red blinks and nothing

Question

Sony Bravia 40" LCD TV

A series of 40 inch LCD HDTVs by Sony.

193 질문 전체 보기

Lora Fomina @loravadim

평판: 11

1

게시일: 2020년 1월 21일

옵션

6 red blinks and nothing

Hello,

I have five years old Sony Bravia KDL-40W600B. Two months ago my TV broke down with the 6 blinks symptom. I browsed the internet for some solution and finally ordered via eBay Sony A-1983-521-A LD Board and replaced it. Everything was fine until yesterday when my TV broke down again with the 6 blinks symptom. Please advise me what to do?

Thank you in advance,

Vadim

There is one very interesting thing. When I bought a replacement board the back side of it was green all around. Now I see it's discolored under one of capacitor like on old board. Maybe this fact can help to trace up an issue.

Thanks,

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

oldturkey03 @oldturkey03

평판: 784.3k

1.1k

894

2.3k

게시일: 2020년 1월 22일

옵션

@loravadim this could have been caused by a lesser quality replacement board. There is always a possibility that your LED backlights are causing this but at this time I would go ahead and replace it once more . I’d consider a different source for that board. Let us know if the new board resolved this issues.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 15개:

There is one very interesting thing. When I bought a replacement board the back side of it was green all around. Now I see it's discolored under one of capacitor like on old board. Maybe this fact can help to trace up an issue.

Thanks,

Lora Fomina 의 2020년 1월 23일

@loravadim it is one of the IC's that overheated. If you can get a couple clearer picture we might identify the type and model of it and determine if this is a common failure. It is possible that this is one of those boards that is "meant" to fail after a while by using substandard parts.

oldturkey03 의 2020년 1월 23일

@loravadim identified the IC as a BD9397EFV LED driver. Yours obviously failed and possibly because of an overvoltage

oldturkey03 의 2020년 1월 23일

Thank you. What is a possible solution? What do I need to replace? Thank you again.

Lora Fomina 의 2020년 1월 23일

A replacement board is less expensive than to get it repaired. I wonder if your board just gets to many power spikes. You may consider a surge protector and give that a try. Again, it may just have been a substandard board.

oldturkey03 의 2020년 1월 23일

댓글 10개 더보기

댓글 달기

There is one very interesting thing. When I bought a replacement board the back side of it was green all around. Now I see it's discolored under one of capacitor like on old board. Maybe this fact can help to trace up an issue.

Thanks, — Lora Fomina
@loravadim it is one of the IC's that overheated. If you can get a couple clearer picture we might identify the type and model of it and determine if this is a common failure. It is possible that this is one of those boards that is "meant" to fail after a while by using substandard parts. — oldturkey03
@loravadim identified the IC as a BD9397EFV LED driver. Yours obviously failed and possibly because of an overvoltage — oldturkey03
Thank you. What is a possible solution? What do I need to replace? Thank you again. — Lora Fomina
A replacement board is less expensive than to get it repaired. I wonder if your board just gets to many power spikes. You may consider a surge protector and give that a try. Again, it may just have been a substandard board. — oldturkey03

Sony Bravia 40" LCD TV

6 red blinks and nothing

Update (01/21/2020)

답변 1개

귀하의 답변을 추가하세요