Is there a way to fix a busted port on the mb without the piece?

Question

PowerBook G4 Aluminum 17"

PowerBook G4 Aluminum 노트북 17" 화면

171 질문 전체 보기

Brandon d @brandond27400

평판: 13

1

게시일: 2020년 1월 26일

옵션

Is there a way to fix a busted port on the mb without the piece?

I purchased a 17” alum pb from ebay and someone has snapped the little white port off of the logic board where the ribbon cable goes in for the keyboard/power button/trackpad and the piece did not come with it. Is there a possibility that I could solder the leads from the ribbon cable to the board and if so what is the pattern and process to it because the port seems to reverse where the cables go.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

oldturkey03 @oldturkey03 평판: 781k 1.1k 891 2.3k · Answer 1 · 2020-01-26T13:04:54-07:00

가장 유용한 답변

oldturkey03 @oldturkey03

평판: 781k

1.1k

891

2.3k

게시일: 2020년 1월 26일

옵션

Brandon d it would be an unwise choice to do so. If you are going through with it you would have to solder fine leads to each copper tab on your flex cable and solder those to the board without shortening it and without turning it. I suggest you purchase a replacement/donor board and desolder the connector on that one. Use that connector for a replacement on your board. If you want to solder something then that would be the way to go. Post some pictures of this connector with your question so we can at least try to find the right one for you. 기존 질문에 이미지 추가하기

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 달기

PowerBook G4 Aluminum 17"

Is there a way to fix a busted port on the mb without the piece?

답변 1개

귀하의 답변을 추가하세요