주요 콘텐츠로 건너뛰기

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

904 질문 전체 보기

Help with Testing iPod Classic logic board with a multimeter

Guys I have a pristine ipod 80gb . It doesn't power on .

So far tested

Display works finne

Harddrive is fine

New Battery

Clickwheel is fine

Tried connecting to the wall charger without battery

I'm really tired need help solving this .

How do I test the board with a multimeter to check if it's shorted out or not

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

@johnwick90 extremely difficult to do since there are no schematics for the iPod. You can check the 30 pin dock connector wiring and see if that is working properly. Check the battery connector on the board since that is a weak spot on those boards. Make sure it is connected properly etc.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Thanks for replying I had seen your old post I had checked the fuse

The power management IC

USB port

Battery connector

All of them are fine. I just don't know what's wrong with the board

Check the coils around the power management IC's and battery connector

댓글 달기

귀하의 답변을 추가하세요

John 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 12

전체 시간: 335