Parts of screen unresponsive after repair

Question

iPad Mini 2 Wi-Fi

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

220 질문 전체 보기

Dan @boymetworld91

평판: 1

게시일: 2020년 3월 11일

옵션

Parts of screen unresponsive after repair

I smashed the screen of my iPad Mini 2 a few years ago, the damage was minor but I chose to get it repaired professionally. The screen works for the most part but certain areas such as the top right hand corner and individual keys on the onscreen keyboard on landscape mode are unresponsive.

I have not damaged the replacement screen in any way, so what could be causing this issue considering most of the screen works perfectly. It’s frustrating because the device still works pretty well given it is almost 7 years old, but it is annoying having to turn the iPad around to use certain functions.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

oldturkey03 @oldturkey03 평판: 784.8k 1.1k 894 2.3k · Answer 1 · 2020-03-11T16:00:33-07:00

가장 유용한 답변

oldturkey03 @oldturkey03

평판: 784.8k

1.1k

894

2.3k

게시일: 2020년 3월 11일

옵션

@boymetworld91 this “it is annoying having to turn the iPad around to use certain functions. “ is a clear indication that the issue is your digitizer. It is really not uncommon to get some that are damaged even prior to installing. Replace the digitizer once more then re-evaluate.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 3개:

What is a regular cost to do this, the iPad is 7 years old and having replaced it once I don't want to spend big bucks again if investing in a new iPad would make more sense.

Dan 의 2020년 3월 12일

@boymetworld91 you can get the digitizer for the iPad Mini 2 for around $20 USD Use this guide for the repair iPad Mini 2 Wi-Fi Front Panel Assembly Replacement

oldturkey03 의 2020년 3월 12일

Before trying another digitizer there are two things to check.

Inspect the screen connector for the digitizer on the logic board. The pins in that connector can come off quite easily when unplugging it.

The way to avoid pins popping off is to pull disconnect from the corner of the connector only with a nail.

If there is indeed a missing pin it'll need to be replaced by someone that does microsoldering.

Also just in case if there is no yellow tape at the bottom border of the digitizer behind make sure to apply that to avoid any EMI interference with the home button cable and housing of the iPad.

Ben 의 2020년 3월 12일

댓글 달기

iPad Mini 2 Wi-Fi

Parts of screen unresponsive after repair

답변 1개

귀하의 답변을 추가하세요