기기를 수리하세요 커뮤니티 상점

모델 A1237 또는 A1304 / 1.6, 1.8, 1.86, 또는 2.13 GHz Core 2 Duo 프로세서

312 질문 전체 보기

옵션

Replacement HDD for MacBook Air A1237 not recognized

Hi All

I have just replaced the HDD on my MBA A1237 with exactly the same type/size of HDD as the original.

Closed the MBA up and restarted and DU is not picking up the new HDD.

I have taken the MBA apart three times now to make sure it's all connected fine and I am not getting DU to pick the drive up.

I followed the instructioned from iFixit:

http://www.ifixit.com/Guide/MacBook-Air-... ement/860/1

I have also now tried to replace the old HDD to see if maybe I bent the HDD cable and that also is not regognized now :-(

Any ideas anyone?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 4개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

This is a longshot, but make sure you have not installed the hard drive upside down, and therefore with the cable backwards inside the drive. Unfortunately the mounting bracket lets you install it either way, so if you forget how it was in there originally, it's easy to install it upside down, in which case it won't see the drive.

I made this mistake once, and I actually ended up returning a drive and getting a new one before realizing it was just upside down.

해당 답변은 도움이 되었습니까?

예 아니요
점수 5
댓글 달기

옵션

Hi rdklinc, many thanks for the reply. I have tried the drive both ways and neither works as I initialy had the same thought as yourself that maybe I had installed it upside down. I think I may have damage the flex cable perhaps so I have ordered a replacement and will see how that goes,

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

I guess it must be the cable then. Make sure you're pushing it all the way into the drive slot, since it's easy to clamp the cable down when it's not really all the way in. Also, for testing, you might want to leave the drive out of the bracket, just to verify that putting the drive in the bracket is not pulling the cable out (which it can do if you're not careful...again there's not much give in the cable, so half a millimeter can make all the difference).

의

댓글 달기

옵션

the cable is broken sure!

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

I've had the exact same thing happen today. Tried to replace the HD, and the new HD was not recognized. Put the old one back in with same issue. Not upside down. Ordering new cable. Crossing fingers...

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Garry Westwell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,425