주요 콘텐츠로 건너뛰기

The fifth-generation Nissan Altima was released in May 2012 for the 2013 model year.

24 질문 전체 보기

2013 Nissan Altima backup camera switch addition, need help with wirin

Hello. So I have a 2013 Nissan Altima 2.5L SV Sedan without Bose and without Navigation. I'm currently in the middle of figuring out how to wire an off/on switch to my factory pre-installed reverse camera so that I can display the camera image at will without needing to be in reverse. I have already figured out that the reverse lights power positive is one of the 3 sky blue wires connecting to the tail lights in the back of the vehicle. What I need to figure out is where the camera connects to the reverse power positive, so I can tap my switch into it and add diodes to the rest of the connections to stop the reverse lights from coming on when my switch turns the camera on. Can anyone tell me where that connection is? What wire I need to tap my switch into? Any suggestions? All help is greatly appreciated. Thank you.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Hi @dongkongtheone ,

Here's the 2013 Nissan Altima Service Repair Manual (SM3E-1L33U1)

Click on Cruise Control & Driver Assistance > Drive Assistance System to download the section of the manual that has full details regarding the rear view camera.

Haven’t been through it all but it is quite comprehensive.

Hopefully a start

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Hi Brenson:

I would start here and download your Altima year and model wiring diagram. I'm assuming you have some understanding of how to interpret one of these given you can find and identify wires in a harness using a probe and understand the function of diodes etc.

https://carmanuals2.com/nissan/altima-20...

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Brensen Garcia 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 9

전체 시간: 782