주요 콘텐츠로 건너뛰기

모델 A1297 Unibody: 2009 상반기, 2009 중반기, 2010 중반기, 2011 상반기 & 2011 하반기

544 질문 전체 보기

Replace the AirPort card

The airport card of my MacBook Pro 17" core i7 mid 2010 is no longer detected after I've upgraded the RAM from 4 to 8 GB.

I've tried reinstalling the two 2GB chips with no better result.

The airport card (now called Wi-Fi card under Lion) does not appear in "System Information/Network/Wi-Fi" whereas it does on my wife's MBP (13" 2011").

I suppose that the card is unfortunately "dead" and should be replaced.

Has anyone any experience with this replacement and would kindly publish the relevant step-by-step guide.

Please…

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

선택된 답변

More than likely it is not "shaking hands" with the system after you changed the system configuration by adding the RAM. The first place I would start is by resetting the SMC and PRAM. Instructions for doing that are here. and here. If this doesn't work we will work on getting you some directions. It should be very similar to the 13" which I know those instructions are here on ifixit.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I've tried both resets, unsuccessfully :-(

The Airport menu bar still shows "No hardware detected".

I've ordered a Bluetooth/Airport board and i'll try replacing it.

The procedure is very very similar to that of the MBP 15" mid 2010, which is on ifixit.

Thanks anyway.

댓글 달기

귀하의 답변을 추가하세요

jimbbo 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 2,653