Problem with FL2400/C2400 in iPhone SE

Question

iPhone SE

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1049 질문 전체 보기

Juan Pablo Iñigo @juanpabloinigo

평판: 11

1

게시일: 2020년 8월 6일

옵션

Problem with FL2400/C2400 in iPhone SE

Hi everybody,

This is my first question right here. I’ve been looking for an answer to my problem but couldn't find it.

I have two Iphone SE (one is mine and the other is my cousins). My phone didn’t turn on after a screen changing. My cousins phone worked but the battery didn’t charge at all.

I could open them and see them under the microscope. Both of them had the FL2400 removed. I tried to solder them back but didn’t succeed and lost them.

So i shortened the pads of the FL2400 with a wire. Doing so, in my cousins phone i lost the C2400 cap.

So the result is this:

My Phone: FL2400 pads shortened with a wire and C2400 soldered. My phone doesn’t turn on and Itunes doesn’t recognize it. But i measured the current and is around 100-200mA.
My cousins phone: FL2400 pads shortened with a wire and C2400 not soldered. That phone doesn’t turn the screen on, but it is alive because Itunes recognize it.

So the question is, do i need to solder FL2400 and C2400 and may be the phones will work? or the problem could be elsewhere.

Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

daniel @tech_ni

평판: 34.6k

10

22

44

게시일: 2020년 8월 6일

옵션

Fl2400 will need to be in place the cap doesn’t really matter, did both phones have the battery disconnected when you connected the lcds

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 7개:

Yes both of them had the battery disconnected. I also checked the backlight filters of the display circuit and are OK.

So i should try replacing the filter then.

I have to see where to buy them because in my country (Argentina) i won’t find them.

Thanks a lot!

Juan Pablo Iñigo 의 2020년 8월 6일

Is that possible that not having the FL2400 can impact on no display at all?

Juan Pablo Iñigo 의 2020년 8월 6일

No it would usually only cause a battery percentage issue.

daniel 의 2020년 8월 6일

Do you think of any other test that i can do to troubleshoot this?

Juan Pablo Iñigo 의 2020년 8월 6일

Can you buy zxw. It will give you diode readings for the lcd connector.

daniel 의 2020년 8월 6일

댓글 2개 더보기

댓글 달기

Yes both of them had the battery disconnected. I also checked the backlight filters of the display circuit and are OK.

So i should try replacing the filter then.

I have to see where to buy them because in my country (Argentina) i won’t find them.

Thanks a lot! — Juan Pablo Iñigo
Is that possible that not having the FL2400 can impact on no display at all? — Juan Pablo Iñigo
Do you think of any other test that i can do to troubleshoot this? — Juan Pablo Iñigo
Can you buy zxw. It will give you diode readings for the lcd connector. — daniel

iPhone SE

Problem with FL2400/C2400 in iPhone SE

답변 1개

귀하의 답변을 추가하세요