Pixel dead after reassembling the last screws.

Hey,

My usb charging assembly and my screen were broken, so I bought both and followed the following tutorial: Google Pixel 3 XL Screen Replacement

There was no tuto for the charging assembly but didn’t run into trouble, just a lot of screws because taking out the motherboard was required.

Once I have changed both, I tested it; put the motherboard back, plugged all the connector, finished with the batttery one, plugged my phone to usb and Magic! all working fine, phone is charging and screen is displaying the battery.

I reassembled all the screws, didn’t have glue so i decided to heat the phone with a heat gun, the same way I opened it, to melt the old glue and gently pressed my phone with a big book. Was looking good except that… phone is not turning on anymore, looks dead dead.

Waited 24hours, dissambled, reassembled, to see if anything was looking broken, nope! Phone is still broken!!

What could have gone wrong in the last step? What kind of troubleshooting can I do?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기