기기를 수리하세요 커뮤니티 상점

The Kenwood Chef A701A is a stand food mixer released by Kenwood.

47 질문 전체 보기

옵션

please can anyone advise on the number of shims on the motor armature

how many shims are there on the motor armature at the bottom end near the control board?

I have removed the armature from the housing and I am not sure how many shims there were.

thanks

Bill24

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Hi @bill24 ,

According to the parts list in the service manual (see p.25-26) there is a small packing washer - part #184, one large shim washer - part #183 and a nylon armature washer - part #186.

Hopefully this is of some help.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

If you look at the service manual quantities, there should be _two_ of the small packing washers (part #184). There may also be another between the other side of the bearing and the fan, if required, to take up any vertical play.

의

댓글 달기

귀하의 답변을 추가하세요

William Broome 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 13

전체 시간: 126