So a small white plastic piece came off and when trying to put it back, it broke. My Switch Lite doesn’t turn back on so I’m guessing it was important. I’m not sure how or where to replace it or if I should buy another part to replace it and if so what part. I’m just confused and not sure what to. Help, please.
좋은 질문 입니까?
평판: 73
3
1
1
This is a critical part for the switch to operate - it connects the daughter board (on the right side) to the main board.
Depending on the damage to the component, you could bodge the job and just use some kapton tape to secure the ribbon cable in place (if it can somewhat still sit securely in place). If you are skilled in micro-soldering, then by all means go ahead and replace it, but you need to obviously be very careful. If you want to delve into it, and it’s your first time doing such a micro-soldering job, I would advise against it given the risk involved; you are better off instead sellin the board to someone who CAN fix it and buy a new board.
All that said, I cannot even find the part so good luck…!
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 3
30일 전: 4
전체 시간: 105
