기기를 수리하세요 커뮤니티 상점

모델 A1286. 2011년 2월 출시 / 2.0, 2.2, 또는 2.3 GHz 쿼드-코어 Intel Core i7 프로세서

586 질문 전체 보기

옵션

Logic board swap for the 2010 board

Hello, I have this machine (early 2011). I bought it for parts for really cheap. There is no way to repair it though. When I disassembled it the board looked a bit odd. It appeared someone BRIDGED resistors.

At this point, I was really disappointed. I started searching for replacement boards, but they are really expensive. And there are GPU issues… So I opted for the 2010 logic board because it has little to no GPU issues. But will the 2010 logic board fit into the 2011 MacBook without any problems?

Block Image

This is that bridged resistors. It is really disappointing I saw this “repair“

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

How about upgrading to a much better logic board! I would go with a 2012 logic board. That gets you a better CPU & GPU than what you would get dropping down to the 2010 logic board.

I’m very sure its the better direction, as I’m typing away on such a converted system answering your question!

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 2개:

Yes, but 2010 is the budget one, and I don't have much money to spend on 2012

의

@Pavol Porubský - You loose the Thunderbolt connection, getting DisplayPort instead.

I haven't tried swapping the logic boards between the 2011 and 2010 so I can't tell you if you'll have issues.

의

댓글 달기

귀하의 답변을 추가하세요

Pavol Porubský 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 49