주요 콘텐츠로 건너뛰기

일반적으로 수리 또는 제작과 같은 지정된 작업을 수행하는 도구의 포괄적 수리 정보 세트입니다.

572 질문 전체 보기

How to use the Spudger's notch?

Hello. Didn’t find any other way of asking a question about this product, so i ended up posting it here, hope you don’t mind.

I just got a “plastic“ spudger and was wondering what is the notch near the flat end used for? Only thing i could find online was that it’s for wire hooking. Seems like nothing i have ever seen demonstrated or even mentioned, product’s description isn’t helpful either. Can someone please clarify this “eastern egg“ for me with a practical example? Just curious for knowledge.

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
2 Comments

Hi @em0_tion ,

Post an image of the spudger. Here's how to do this on ifixit 기존 질문에 이미지 추가하기

What a great question! I have no idea, and we sell this tool!

댓글 달기

답변 2개

선택된 해법

Block Image


not very specific but i found this

해당 답변은 도움이 되었습니까?

점수 2

1 Comment:

Thank you, exactly the info I was looking for! ??

댓글 달기

Hi @em0_tion ,

I think that the notch is there to hold wires when soldering them in.

I haven’t seen it done but suspect maybe it is if you don’t want to use metal pliers etc to hold the wire in position whilst soldering it, especially if it were on ESD sensitive component connections with small and close connections.

You can loop the wire in the notch and then hold the end of the wire down with the end of the spudger.

Just what I think anyway ;-)

해당 답변은 도움이 되었습니까?

점수 1

1 Comment:

That's a good guess. I wish there was a way to receive an answer from the guy that actually designed the tool with a specific intention in mind. Such a mindsore xD

댓글 달기

귀하의 답변을 추가하세요

Emiliyan Yankov 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 19

전체 시간: 236