iMac fan and CPU maxed with Kernel job after screen replacement

Question

iMac Intel 27" Retina 5K Display 2019

A2115 / 2019 / 프로세서 3.0GHz 6코어 i5부터 최대 3.6GHz 8코어 i9까지. 2019년 3월 19일 출시.

131 질문 전체 보기

Aboodness @aboodness

평판: 1

2

게시일: 2021년 1월 14일

옵션

iMac fan and CPU maxed with Kernel job after screen replacement

Hello, I recently replaced my iMac’s screen after the last one had a nasty crack on it. After I got everything together, I fired up the machine and during the POST, the fan started up at full speed, the machine loaded but the CPU was so taxed, everything slowed to a crawl. Upon further inspection, I realized that I neglected to install the monitor temp sensor. I pulled the old sensor off the old screen, installed it in the new one, and fired up the machine again, no affect. Beyond the HD sensor and the Monitor, i’m not aware of any other removable sensors. Not sure what i’m missing. Any advice is more than welcome.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

Dan @danj 평판: 479.4k Self employed contract worker 35 329 971 · Answer 1 · 2021-01-14T14:53:32-07:00

가장 유용한 답변

Dan @danj

평판: 479.4k

Self employed contract worker

35

329

971

게시일: 2021년 1월 14일

옵션

Review Step 25 & 26 iMac Intel 27" Retina 5K Display 2019 디스플레이 교체 I’m suspecting you forgot to transfer the sensor or connect it.

You may want to install this app TG Pro getting the full version will give you deeper details which could also help you figure out and locate what’s going wrong.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 4개:

Unfortunately, I figured this out early on. I pulled that sensor off my old screen and installed it on the new one. thank you though.

Aboodness 의 2021년 1월 14일

@Aboodness - So you are working correctly now?

If that was it don't forget to accept the answer - Thanks!

Dan 의 2021년 1월 14일

I went ahead and purchased a new sensor for the screen, this ended up fixing it. Thank you.

Aboodness 의 2021년 1월 22일

@Aboodness - Great news! Don't forget to accept the answer - Thanks!