주요 콘텐츠로 건너뛰기

First generation of Toyota's full-size SUV.

8 질문 전체 보기

Radio Wiring all mixed up.

My radio was torn out along with the plug that powered the radio/sent data to speakers. Now I have no idea which wires to to where so I can reinsert them into their proper ports.

Vehicle specific: Toyota Sequoia 2003 AWD SR5

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Hi,

Here’s a link to the Toyota Sequoia 2001-2007 Service Repair Manual + Owner’s Manual that may help.

Scroll down and click on the Diagnostics link.

When the file opens, scroll down to p.2163 (page numbers are at the bottom of each page - also shown as DI-1969 at the top of the page - if you type1977 in the box to the left of 2393 in the header bar and press the Enter key, you will come close to the page.)

This page and the following page give all the wire colours and their functions for the radio receiver assembly (separate type amplifier)

On p.2165 (DI-1971) is the wiring for the radio receiver assembly (built-in type amplifier).

This section of the manual also shows how to do the diagnostics for the radio etc

Hopefully this is of some help.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Eric Feil 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 35

30일 전: 129

전체 시간: 2,802