주요 콘텐츠로 건너뛰기

모델 A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 또는 2.8 GHz Core i7 프로세서

432 질문 전체 보기

GPU heatsink black or burned

Block Image

I opened up my imac to see why it was not powering on. When I disassembled the heatsinks, I found that the GPU heatsink is black from under. Does it mean that the GPU is burned out is the reason for it not turning on whatsoever.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

That is a tell-tale sign the GPU chip has failed (shorted)

해당 답변은 도움이 되었습니까?

점수 0

댓글 7개:

Also I found that a few pins in the cpu socket were SLIGHTLY bent, so i aligned them back . Is it okay?

So the CPU was also bad? Be very careful! as this pins are like a bent paper clip one to many bends it snaps! One bend is about it before it goes.

Sadly, once the socket is gone that's the end of the logic board.

@danj So, if I bake the gpu at 200 degree celcius, could it revive the shorted GPU?

@btwtg - Cooking your GPU after it has shorted out won't fix it. As they say you can't un-break an egg.

@danj I've tested the PSU and it reads 12 V and 5.5V with diagnostic led #1 on.

I've even baked the GPU but it didn't help. CPU socket and CPU are fine with no missing/damaged resistors. So, do you think the problem is in the Logic Board or GPU. It would be very helpful if you can give me the schematics for this model.

thanks!

댓글 2개 더보기

댓글 달기

귀하의 답변을 추가하세요

BTW TECH 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 10

전체 시간: 103