기기를 수리하세요 커뮤니티 상점

Repair guides and support for all-in-one washer and dryer assemblies as well as stacked units.

141 질문 전체 보기

옵션

Easiest way to get to lid switch for replacement.

Hi I have a whirlpool heavy duty thin twin washer /dryer combo unit. Model #LTE5243DQ3 it’s an older model I purchased from previous apt. Tenants. I’m looking for the easiest way to replace the lid switch. I will be doing it myself when new part arrives and I have tried to remove washer top by unscrewing screws on middle panel between washer and dryer and tried to pull washer top straight out but it won’t come out. What am I doing wrong???! I’m trying to save money and do the repair on my own. Please help with advice. Thankyou!!!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi @tsprague1972 ,

Not sure if it is the same but as well as the two screws holding the panel between the dryer and the washer there should be two more screws at the back of the washer that are holding the top cover of the washer.

Once you have released them the cover should pull forward.

Then you unplug the lid switch cable, flip the cover over and lay it flat so that you can replace the lid switch.

Reassemble in reverse order.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Tammy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 29

전체 시간: 983