주요 콘텐츠로 건너뛰기

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1049 질문 전체 보기

Screen unresponsive - water filtered under screen?

Hello everyone! My iPhone SE (1st generation) was in the pocket of my jacket one rainy day (1st mistake) and when I came back home later that day I noticed some water had found its way under the screen. There were loads of little water bubbles, but the phone worked fine so I didn’t think much of it (2nd mistake). During the following days, the water slowly disappeared and the screen looked like it was back to normal. However, on the third day or so the touch screen stopped working and now still doesn’t work. The rest of the phone seems to work fine, buttons, internet connections, alarm (sigh).

Has anyone else had this problem before?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Unfortunately it seems the water damage has spread inside the device as you took no immediate actions (putting the device in rice overnight is the most common and surprisingly effective method of water removal). At this point there is likely some corrosion that has spread on the screen/logic board and is causing the issue. If the display is still working and it’s just the digitizer, you may be able to open up the device and give the inside a really good clean with some isopropyl alcohol. I’d suggest even leaving the logic board in a small amount of iso for a little while and then gently cleaning with a soft toothbrush. Thi may remove any water damage currently preventing it from operating correctly although it won’t be a definitive fix and the corrosion may come back later.


Ideally, you would replace each part exposed to water and ensure that there is no corrosion left inside the device.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

VDG 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 14