주요 콘텐츠로 건너뛰기

24" 화면; 내장 iSight 카메라, 마이크 및 스피커; 1920x1200 해상도. 2008년 10월 출시, 모델 번호 A1267로 식별.

84 질문 전체 보기

I want to convert the isight that comes with the display into an USB o

I have one isight from this screen and I want to use it in my Desktop computer as webcam converting it into a USB one. I've seen many people already done this with other modelos but mine has different wire colors

Update (06/22/2021)

This is my webcam connector https://drive.google.com/file/d/19FsGzWg...

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

When i cut a usb cord there were only 2 wires?

댓글 달기

답변 2개

선택된 답변

@gerardit post some good pictures of what your camera connector looks like and the board where it plugs into. Cable colors are really not standardized yet and thus it can’t be taken for granted that it is connected different. Continue by checking the schematics and that will be your guide for that. The cable color will always correspond to their position on the connector. With this schematic you can connect it to a USB connector.

Block Image

기존 질문에 이미지 추가하기

Update (06/27/2021)

@gerardit thank you for adding the image

Looks like

Pin 1 ==>Grey

Pin 2 ==> White

Pin 3 ==> Green

Pin 4 ==> Blue

Pin 5 ==> Black

White would be USB Data negative

Green would be USB Data positive

Blue would be USB Vcc 5V positive

Gray and Black would be ground.

Those colors actually already correspond with the standard USB cables with the exception Red on USB meets Blue on your camera.

Block Image

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

thank for your help it worked

댓글 달기

Check out this guide Page 58 for the cameras wiring

해당 답변은 도움이 되었습니까?

점수 0

댓글 5개:

@danj this must be one of your weakest answers ever. There is absolutely no reference to any of the wiring that is pertinent to this question. Maybe you should consider an edit to this.

@oldturkey03 - How so, a volt meter is all you need to ID the power and the other two are the USB data.

@danj not with the link to the manual you provided.

3. camera is the connection to the logic board.

Probing the header for voltage to remove the power feeds the USB data feeds are left (Green & White wires in your image)

The reason I didn't list the colors is Apple has used a few different suppliers which used different colors.

Granted I didn't hand it to them like you have, but I didn't want to mis-lead if the cable wires are different and I didn't have one to compare to be sure.

@danj oh I see. Just another outstanding explanation. Makes perfect sense to me :-)

댓글 달기

귀하의 답변을 추가하세요

Gerard 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 17

전체 시간: 500