Hello I have A 55PUS6501/12 that has black screen . I have tested with A flaschlight and dint se anything. I have cheked 1 fuse on the mainboard and one on the t-con and they are working. I have about 60 v out on the led on the main board. T-con have 12 v . And sugestion what to do ? Thanks// Robin
The w red cables are get 60v each.
좋은 질문 입니까?
평판: 784.8k
1.1k
894
2.3k
@normansweden 60V on the backlight LED is not enough. Double check your power board and see what voltages you get on the connections to the main board. It is the main board that tells the power board to turn on. If the voltage on the backlight LED connector is/stays at 60V you are having a power issue on that board. Check for more fuses on it. Post some good pictures of your boards with your question so that we can see what you see. 기존 질문에 이미지 추가하기
해당 답변은 도움이 되었습니까?
Hi Robin,
Did you manage to fix that issue? I have the same problem and also with 60V, no backligths, no image.
해당 답변은 도움이 되었습니까?
24 시간 전: 1
7일 전: 4
30일 전: 10
전체 시간: 275
