해결됨: Corroded battery compartment Polaroid Automatic 100 - Polaroid Automatic 100

Corroded battery compartment Polaroid Automatic 100

Is it possible to replace the battery compartment/wiring harness for a Polaroid Automatic 100? Are replacement parts even available? In my unit, there is corrosion, and the Negative wire terminal has broken off (see attached photo). I see a single Philips screw that apparently secures the plastic battery holder in place; but I don’t see a way to remove/replace corroded wires and harness. Any advice or help would be greatly appreciated

게시일: 2021년 9월 12일

옵션

Hi @gflashner ,

Here’s the service manual that may help. Maybe you can open the camera using the info in the manual and solder in a new wire to replace the corroded broken old one.

The part number for the battery wire harness is 22694 (as shown in the service manual - see p.26) but I cannot find it online using the part number. (cost was $0.44 in 1970!)

If other parts are also required and cannot be found then this may be an option to consider, depending on the price and the condition of the battery wire harness of course. Just a thought.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 1개:

Hi @jayeff . Thanks so much for your detailed recommendations and, in particular, for including the link to the relevant Polaroid service manual. You have been most helpful in guiding my decision as to what to do next!!

Gary 의 2021년 9월 13일

댓글 달기

Polaroid Automatic 100

Corroded battery compartment Polaroid Automatic 100

답변 1개

귀하의 답변을 추가하세요