기기를 수리하세요 커뮤니티 상점

This laptop from HP was released in November 2011. It has a 17.3" display and and comes in either silver or nero black.

10 질문 전체 보기

옵션

My screen goes black or blue with windows 10 installation

My laptop when with windows 7 works but without the drivers for the Radeon 7690 AMD graphics. When I upgrade the driver using the appropriate graphics driver and reboot the laptop. The screen goes black but you can hear the machines working fine but the display isn't working. When I install windows 10, it does that sometimes 4/10. When it finally loads to desktop with the proper graphics driver, it shows no memory for the graphics driver and goes blue or black after 5 minutes of idleness. Have battled this issue for so long that I give up. Any help will be greatly appreciated

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Do you have the Catalyst Software Suite v15.7.1 Radeon driver installed?

''https://www.amd.com/en/support/graphics/...

Important: Install drivers in Windows 8.0 “Compatibility Mode” - very important.

Boot up to Windows 10 and uninstall the graphics drive in Control Panel> Device Manager and reboot. Windows will either install the generic video driver or re-install the Radeon driver. Did that work?

If that doesn’t work use “Display Driver Uninstaller v18.0.4.4

https://www.majorgeeks.com/files/details...

DDU completely removes all traces of AMD, Nvidia, and Intel graphics card drivers. Follow directions on DDU web site.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 2개:

I have tried both and yet it hasn't worked. Like I mentioned earlier, the laptop works fine with win 7 which only gives me a generic display. As soon as I upgrade the graphics driver provided by hp support or from AMD, the screen goes blue or black again. You can the laptop working but not the display. I don't know if GPU need to be changed or what else I need to do. The display experience sucks with the generic display reason why I try to install the graphics driver. I still need help

의

@Freddy Collins

You did not mention if you ran "Display Driver Uninstaller". I have fixed many video driver problems with this application. Sometimes the corrupted files get buried quite deep in the OS.

I mean, what have you got to loose by trying?

Important: Install drivers in Windows 8.0 “Compatibility Mode” - very important.

* Is your BIOS version F.09 Rev.A?

* There is also the HP Unified Extensible Firmware Interface (UEFI) Support Environment:

https://support.hp.com/us-en/drivers/sel...

for diagnostics (which I have not tried myself) and of course the on board HP diagnostics - press <Esc> key when first powering on.

의

댓글 달기

귀하의 답변을 추가하세요

Freddy Collins 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 90