주요 콘텐츠로 건너뛰기

MacBook 제품용 2세대 자성 AC 전원 어댑터는 2012년에 처음 출시되었습니다. 이전 세대 시스템과 호환되지 않습니다. 45W, 60W 및 85W 버전으로 제공됩니다.

26 질문 전체 보기

Hack magsafe 2 to use as generic PSU

Hi,

I. have an 85W Magsafe 2, which had the cable damaged.

As I don’t need it to power a mac, would it be possible to use it as a bench power supply?

Measuring the voltage with no load, shows 3V on my multimeter. How can I make it work? I read somewhere that it needs to see 40kohm, to activate.

I’ve tried to put a 40kohm resistor there and it doesn’t wake up to max voltage.

Cheers,

Pedro

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

It’s not designed to be a generic power supply. Its circuitry is designed to charge a Li-Ion battery that’s it.

A bench power supply needs the ability to select a voltage and control the current draw. Without that you risk damaging the device if over powered.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Thanks Dan.

What if I want to use it as an USB-C charger for my phone/tablet. Is that possible?

@pcardoso73 - Sorry Apples charging system is unique to them.

One of the biggest benefits of the USB-C standards effort was to define a charging standard.

The Apple MagSafe charger won't offer the needed connections and the temperature feedback system which uses a one wire conn connection won't work within the USB-C device.

댓글 달기

@pcardoso73 sure you can. You just have to be careful and follow instructions like this. One of the issues that I see coming at you, is something like this “with no load, shows 3V” which should not even be there.

해당 답변은 도움이 되었습니까?

점수 0

댓글 4개:

@oldturkey03 - This is not something I would recommend.

Besides I doubt Pedro is advanced enough to get this deep and likely doesn't have the rest of what's needed and lastly a cracked open charger is not very safe!

@danj I am not going to guess the skill level of @pcardoso73 but it can be done. It is not the design of the Magsafe that would be an issue. @pcardoso73 can check the video and see if that is what he wants to do and only he knows his comfort level when it comes to a project like this.

So yes, it CAN be done.

40k ohm resistor in how many watt?

if you cant calculate power dissipated by 16V power supply into a 40kohm resistor you shouldnt be asking.

댓글 달기

귀하의 답변을 추가하세요

Pedro Cardoso 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 26

전체 시간: 1,036