기기를 수리하세요 커뮤니티 상점

A Desktop PC built from off-the-shelf DIY parts, rather than a prebuilt from a major manufacturer. These can also be built by an SI using off-the-shelf parts.

170 질문 전체 보기

옵션

Can power supply fuse (F12.5A) be replaced wih a 12A fuse?

The F12.5A ceramic fuse for 700 watt ATX power supply is blown, I think it may have been because of an accidental short. I have searched widely and although different sites list the fuse, no one has one and seem to indicate that the fuse is no longer produced. Would a 12A fuse work or is that half amp a deal killer? The load would be MB, 3 HD, 1 optical drive. Video would not be a gaming one.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Yess O.5 amp lower is acceptable, make sure to test fuse by checking its continuity through a tester meter always before installing it.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

hadn't thought about testing the fuse - useful!

의

댓글 달기
가장 유용한 답변

옵션

Lower is fine but NOT higher.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

귀하의 답변을 추가하세요

Jim Lindemann 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 15

전체 시간: 344