주요 콘텐츠로 건너뛰기

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1051 질문 전체 보기

Is there a different footprint between iPhone NANDs?

I’m looking into upgrading the storage on two iPhones and want to know if there is a difference between the NAND flash memory chips. Namely the 6s and SE (gen 1). I know I need to program the NAND before installing it on the logic board so will I need a separate programmer for each phone model? Are the NAND chips interchangeable between these two phones?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Just comparing the teardowns, the model number for the actual NAND chip for the 6S and the SE 1st gen are the same. At least for the Toshiba branded NAND on the phones they tore down. And it looks like they both use the same layout and pin outs. I have never done it personally, but it seems possible.

EDIT: found this article which indicates they are compatible. https://logi.wiki/index.php/NAND_Compati...

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Griell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 6

30일 전: 16

전체 시간: 213