기기를 수리하세요 커뮤니티 상점

Guides and support for devices that play video from Blu-Ray Discs.

111 질문 전체 보기

옵션

Pioneer BDP-140 "UNK DISC" error

My Pioneer BDP-140 has worked flawlessly for around 8 years. However, lately when I insert CD-audio and DVD-video discs it just displays the message "UNK DISC" and refuses to play said discs (the discs do not even spin). Blu-ray discs playback is normal.

Some things I already tried with no success:

Loaded default settings

Firmware reflash (v1.20)

Firmware downgrades (v1.17, v1.10 and v1.08)

Replaced entire loader assembly

Any help would be greatly appreciated.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 2개

@hp78 sounds like your laser cannot read your disks. clean the laser assembly and see if that helps or worst case scenario you may have to replace it.

의

Actually I already replaced the complete loader assembly, which includes the 2 lasers. However the player displays the exact same behaviour.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@hp78 that is a tough one since you already replaced the loader I would assume that the issue must then come from somewhere on the main board. I suggest you start with something like this Flowchart

Block Image

and go through those. Also, try the service mode and see if that shows you anything unusual. Pioneer BDP 140 Rrv4263

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Thank you for the answer.

I am thinking there may be a calibration issue with the new loader. Looking at the service manual, on the FA Mode section, it is requested that you insert a calibration disc "GGV1368", which I do not have of course.

Do you know how to find this disc? Or at least an image of it?

의

댓글 달기

귀하의 답변을 추가하세요

Hugo Perez 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 18

전체 시간: 876