옵션

Display Temp Sensor Board

I am trying to fix an iMac 2010 EMC 2389 Display but the wires to the temp sensor board on the rear of the display have become disconnected. I can solder them back easy enough, but I cant seem to find the proper wiring diagram / schematic to ensure the correct polarity.

The board front has the markings ICT-Lanto and the rear has

94V_O DS1

E220742

marked on it. Can anyone help with which wire to solder to which output? Will post a photo.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

게시일: 2022년 1월 14일

옵션

Fxguy1 the most inward connection on your logic boards temp sensor connector is the Positive and it is wire number one on your sensor board. The outer one is the Negative and connects to point number 2 on your board.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

@Fxguy1 I converted your comment to a separate question. That way you will get the right answer and lots of advise on how to further troubleshoot if necessary

oldturkey03 의 2022년 1월 14일

댓글 달기

iMac Intel 21.5" EMC 2389

Display Temp Sensor Board

답변 1개

귀하의 답변을 추가하세요