주요 콘텐츠로 건너뛰기

Smaller version of the original iPad Pro. Released March 31, 2016. Features a 9.7" display, A9X processor, and 32/128/256 GB storage options. Available in Silver, Space Grey, Gold, and Rose Gold.

147 질문 전체 보기

Adhesive strip placement around camera

Trying to finish a screen replacement, I bought the iFixit adhesive strips. The two large strips make sense so me, but the smaller piece with the blue backing is a little puzzling.

The long strip would seem so fit at the iPad edge between the two antenna breaks, and the bottom pieces appear to have some place to go, but the inner sides would appear to float on either side of the camera. Did I throw out even more parts I still needed than I already figured out with the old screen?

Thank you.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

There are two U-shaped antenna brackets on the top of the wifi model.

I’m guessing these brackets don’t exist on the cellular model, therefore they land on empty space.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

That makes sense, thank you! I’ll just trim off the extra.

@mcarland So you do have the cellular model?

댓글 달기

Best off just pairing up with what you already have, and see where it fits.

Some cutouts are cut out to fit the frame first, some go on the glass.

From experience, anything other than tesa tape just doesn't work well. Best off buying premium digitisers with tesa tape, and then use primer on the frame. Less hassle messing around with cutouts.

If you have no other strips left, try and put your own in where it's missing.

If it helps, I have a video of keeping the glass down really well and works everytime!

https://youtu.be/u5ZSSyGz98I

Hope that helps.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Thank you for the response. I bought the iFixit screen replacement that had the tape on it, but the flat tape got pinched in the wrong place after I did a trial fit, and the screen popped back open the next day. I also hadn’t done a great job cleaning all the old adhesive off, no chunks but still tacky, so this time I’ve done a more thorough job cleaning up. I have the iFixit adhesive kit because I didn’t know there was already one on the new screen and ordered one at the time.

How important is the primer? Should I wait to close it up until I can get some?

I’ll definitely check out your video.

Since I've used primer, 100% of my repairs have never lifted.

I even now start to use the primer for housings & even the back of the LCD frames where it touches the dust seal.

And also, with LCD refurbs on oled panels, never had any lift using the primer.

댓글 달기

귀하의 답변을 추가하세요

mcarland 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 55