기기를 수리하세요 커뮤니티 상점

The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

319 질문 전체 보기

옵션

Dryer runs, no heat. Thermal Fuse ok. Gas dryer.- RESOLVED

Dryer runs, no errors. No heat, and no error codes.

Tested thermal fuse with a multi-meter, and it looks fine.

There is some slightly toasted lent at the bottom, but not a fire.

Are there guides for troubleshooting the gas solenoid or the igniter ?

Thank You

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 2개

Hi @garose ,

What is the model number of the dryer?

의

The model number is 110.94821300

Type:  DADT-NAT-1206006-EL22

Thank you

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi @garose ,

Here's a video that shows how to test an ignitor in a dryer

The tech sheet for the dryer is Whirlpool part # LIT 8557311 but unfortunately I can't find it online. Having this would give the schematics and also the diagnostics, that would be more help.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

Figured it out.

There were enough spiderwebs inside, that it restricted fresh air flow.

So the flame from the burner was not pulling far enough down the draw tube to not land on the thermal sensor above the ignitor.

It was a fine layer of webs, so I just didn't notice them at first. But once wiped away, it works well once again.

Thanks for the help, sincerely !

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Garry 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 3

전체 시간: 139