주요 콘텐츠로 건너뛰기

Repair guides and support for LED, LCD, HD and other Vizio TVs.

932 질문 전체 보기

Vizio m55-e0 blank screen

Block Image

Anyone have an idea about this? Power on and tv displays ok with some flickering for about 15-20 minutes before going blank as pictured. Sound still plays, I've replaced every board in the tv with "new" replacement parts.(main board, power board, t con board) I'd been working on this off and on for the past year just to see if it could be salvaged as a secondary TV but now I'm ready to chuck it since I don't care to try to source and replace the panel if that's the issue. Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 1개

선택된 답변

@trwolf you have bad backlight strips. The circles you see are caused by missing diffuser caps on the LED's. Remove the back cover from your TV and check the label affixed on the back of the LCD panel. Use the model number to find the proper backlight strips. In order to replace those you will have to disassemble the panel/. Not very complicated just a PITA because of the panel size.

Different model same idea for you to check on. Watch the LCD panel since it is flimsy and may bend on you. Avoid that by any cost.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Man, you weren't lying about it being a PITA based on the video. Looks like I'll give it a shot if for nothing else than the experience/practice. Thanks for your help

@trwolf go for it! The only difference that I do is that I use two flat wooden 1X2 under the LCD when I lift it. Of course you’ll need an extra set of hands for that. I just don’t like the way those panels can flex. It is the greatest challenge with this type of project

댓글 달기

귀하의 답변을 추가하세요

The red wolf 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 21

전체 시간: 453