주요 콘텐츠로 건너뛰기

2017년 9월 22일 출시. Model A1863, A1905. GSM 또는 CDMA / 64 또는 256 GB / 금색, 은색 및 스페이스 그레이.

873 질문 전체 보기

Doesn’t charge if bracket is installed

So I’ve replaced the battery and it’s charging only if the bracket that covers battery, display and home button cable is removed.

If I install that bracket back it’s not charging at all.

It also showed strange behaviour when it would charge with bracket, but when not all screws are in place (doesn’t happen in all cases).

What can be a reason here?

Can I use my phone without that bracket at all?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

가장 유용한 답변

Check that you are using the correct screws, a longer screw can cause a short and damage to underlying circuit boards I assume you've looked carefully for visible shorts or misrouted cables? I'll get back after I've researhed a bit.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I know I've seen a video with this problem but I can t find it now!

댓글 달기

Hi

This behaviour is really strange and I never really seen before

You can use the phone without the brackets but it isn’t recommended as if the device is dropped it can unplug and prevent the device from working properly

I would try cleaning the connectors on the device and the parts with isopropyl alcohol to see if it’s caused by dirt being in the way of making a proper contact

Hopefully this helps, if it doesn’t give me a shout

Thanks:-)

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Yolqin 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 47