기기를 수리하세요 커뮤니티 상점

2018년 9월 21일 출시. Models A1921, A2101, A2102, A2104. GSM 또는 CDMA / eSIM 또는 nano-SIM / 64, 256, 또는 512GB / 은색, 금색 또는 스페이스 그레이. ("iPhone 10 S Max"로 발음합니다.)

376 질문 전체 보기

옵션

Why does my screen go black randomly?

I recently replaced my broken screen on my iPhone XS Max with an IFixIt LCD screen. Since my phone screen was completely unresponsive to touch before replacing it, i wasn’t able to shut my phone down before repairing the screen. I just unplugged the battery connector and went on with the procedure. Now, randomly, my phone screen will go black while i’m using it but the phone is still on. All it takes to fix it temporarily is to turn the phone off and on. Now, is it because I unplugged the battery connector during the repair without shutting the phone down or is it a faulty screen? Please Help!!!!!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Unplugging the battery connector would not have caused any damage. In your description you say it is an LCD screen and these can be problematic and you should have purchased an OLED screen. If it is an OLED screen I would back the phone up and do an update or restore and see if the problem persists, if it does you will need to return the screen for a replacement. Before you do though I would make sure the top flex connector on the screen is seated properly and if the screen is losing image or backlight, you can do this by shinning a torch on the screen and see if you can make out an image.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 3개:

Hi @imicrosoldering

I thought OLED screens didn't have a backlight as the light comes from the pixels themselves, but I'm always willing to be corrected if I'm wrong ;-)

Cheers

의

@jayeff You are right Jeff. I was thinking if the ambient light sensor was playing up you should be able to see an image with a torch shined onto the screen.

의

@imicrosoldering

Learning all the time ;-)

Cheers

의

댓글 달기

옵션

WAIT...unplugged the battery connector during the repair without shutting the phone down?!?!?!?

congrats< now you need to replace the battery because you messed up there.

and also did you transfer the data of the original iPhone screen? that could be a problem 2

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

didn’t have to be crabby abt it lol. I explained why i couldn’t power the phone down. i think i might contact ifixit for a different screen before i replace the battery

의

댓글 달기

귀하의 답변을 추가하세요

Nicholas Albensi 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 7

전체 시간: 192