주요 콘텐츠로 건너뛰기

2009년 3월에 소개된 The Mac Pro (Early 2009)는 Intel Nehalem 아키텍처를 Apple의 전문가용 데스크탑 라인에 도입하였으며 미묘하게 재설계된 내부는 2010 및 2012 CPU 업데이트를 통해 소개되었습니다.

202 질문 전체 보기

Mac Pro 4.1 flashed to 5.1

Hi guys, (@mayer)

I am wondering if I flash MP 4.1 to 5.1 what other "modifications" are need to get "full MP 5.1" ?

Is software/hardware support same for flashed 4.1 and 5.1 or there are any differences ?

Can I modified CPU heatsink from 4.1 so I will be able to use normal CPU and no de-lidded ?

Can I use normal CPU (no de-lidded) in MP 4.1 if I use water cooling ?

Anyone have any experiences with MP water cooling ?

Thanks a lot guys.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Watch this and then see if you have unanswered question:

https://www.youtube.com/watch?v=VrbnfYgg...

해당 답변은 도움이 되었습니까?

점수 3

댓글 5개:

@mayer thanks a lot for the video :)

but he using "normal CPU" so are de-lidded CPU's only in MP 4.1 dual CPU ?

also can't read the spec on RAM's but I know that MP 5.1 support 1333MHz why he using 1066MHz ? (will MP 4.1 flashed to 5.1 support 1333MHz ?)

Thanks

I remember that I has to use delided CPUs on the 2009 2.9 dual machines. I'm still using the 1066MHz RAM in both a 2009 & a 2010.

Here's a vid on the deluding:

https://www.youtube.com/watch?v=Et29f4uT...

As a note, I used DodDudes method to upgrade to High Sierra and that PCIe SSD crashes about 3-4 times a day in both the 2009 & 2010 Mac Pros.

@mayer isn't 2010 officially supported by High Sierra or you have to do this because PCIe SSD (mean DodDudes) ?

Well this is why I am so confused about de-lidded CPU's but if I check price for 2x de-lidded X5690 and dual CPU try for 5.1 it's almost same price :D

and what about SW/HW differences /support ? is there any for 5.1 and 4.1 flashed to 5.1 ?

I did the DosDude upgrade on my 2009 2x 2.93. It was crashing, so moved the PCIe card with the SSD drive to the 2010 and it keeps crashing. Need to backup data, reformat drive and do the install on the 2010. BTW the 2009 processor board will not move to the 2010.

댓글 달기

귀하의 답변을 추가하세요

Rob 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 15

전체 시간: 189