Fridge Ice Maker Icing Up Freezer

Question

Whirlpool Refrigerator

Fridges made by Whirlpool.

224 질문 전체 보기

jason @friday126

평판: 1

게시일: 2022년 11월 30일

옵션

Fridge Ice Maker Icing Up Freezer

We have a whirlpool wrs588fihz00 fridge. The ice maker (where it shoots into the ice cube holder that dispenses water/ice) consistently accumulates were the maker shoots into the holder. Shard like ice formations branch out from the maker/shoot area and over a week or so build up to a point that opening and shutting the freezer door is hard to do. I have to de-ice the freezer with a metal spatchula. Even when I make sure every bit of ice off the the shoot/ice maker and freezer internal walls the ice will still continue to accumulate.

Anyone have experience with this or have an idea how we can trouble shoot it?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

jayeff @jayeff 평판: 463.4k 11 374 1.5k · Answer 1 · 2022-12-01T03:32:59-07:00

가장 유용한 답변

jayeff @jayeff

평판: 463.4k

11

374

1.5k

게시일: 2022년 12월 1일

옵션

Hi @friday126

Here's the tech sheet for the refrigerator. Get into the diagnostic mode and run Step.45 and check if the water fill test is OK and that it is not trying to overfill.

The refrigerator requires a cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) to operate the water dispenser and ice maker. Check if the water pressure to the premises is within these limits. It may be that's there too much pressure for proper function of the valves etc

Try slightly turning back the water supply faucet that the refrigerator's water pipe connection is attached to, to reduce the water pressure and check if that works.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks, we'll give that a try when I get home in a few days.

jason 의 2022년 12월 4일

댓글 달기