When battery plugged in just beeps and won’t boot up.

Question

MacBook Pro 13" Unibody Early 2011

2011년 상반기 모델, A1278 / 2.3 GHz i5 또는 2.7 GHz i7 프로세서.

782 질문 전체 보기

nick miller @nickmiller54648

평판: 13

1

게시일: 2022년 12월 2일

옵션

When battery plugged in just beeps and won’t boot up.

My MacBook won’t turn on when battery and power is plugged in.

My MacBook turns on fine when the battery is disconnected and I use the sequence

Hold power button for 10 seconds

Connect power source

Carry on holding button for 10 seconds

let go and Mac powers up.

As soon as I disconnect the mains connect the battery in and then put the mains back on a beep with white light on the front happens every one second.

I’ve tried to hold power for 10 seconds then Connect at power hold power still including shift, control,option and command for 10 seconds and then let go but again Mac does not boot up and gives beep everyone one second.

Any ideas?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 1개

Volodymyr @volodymyr12 평판: 175 2 1 · Answer 1 · 2022-12-02T13:35:01-07:00

One thing you can try is to reset the PRAM on your MacBook. PRAM (or parameter random access memory) stores certain settings and preferences for your computer, and resetting it can sometimes resolve issues with power and battery performance. To reset the PRAM, follow these steps:

Shut down your MacBook.
Press the power button, then immediately press and hold the Command + Option + P + R keys on your keyboard.
Keep holding the keys until your MacBook restarts and you hear the startup sound for a second time.
Release the keys and allow your MacBook to boot up normally.

Another thing you can try is to reset the NVRAM (or non-volatile random access memory) on your MacBook. This is similar to resetting the PRAM, but it stores different types of settings and preferences. To reset the NVRAM, follow these steps:

Shut down your MacBook.
Press the power button, then immediately press and hold the Command + Option + P + R keys on your keyboard.
Keep holding the keys until your MacBook restarts and you hear the startup sound for a second time.
Release the keys and immediately press and hold the Command + Option + P + R keys again.
Keep holding the keys until your MacBook restarts and you hear the startup sound for a third time.
Release the keys and allow your MacBook to boot up normally.

Both of these options don’t seem to work.

As soon as the battery is plugged in it struggles to boot up with any option I try. — nick miller

MacBook Pro 13" Unibody Early 2011

When battery plugged in just beeps and won’t boot up.

답변 1개

귀하의 답변을 추가하세요