주요 콘텐츠로 건너뛰기

모델 A1419 / EMC 3070 / Mid 2017 / 3.4, 3.5 또는 3.8 GHz Core i5 또는 4.2 GHz Core i7 Kaby Lake Processor (ID iMac18,3) / Retina 5K Display. 시스템이 매우 유사하므로 이전 iMac Intel 27" Retina 5K Display (Late 2014 & 2015) 안내서를 참고하십시오.

294 질문 전체 보기

Internall HDD not showing in HDD list-when restart says uninitialized

Hi there

I really have a big problem, I have an internal storage HDD 3TB which was fine until a couple of days before

At some point when I restarted my imac it disappeared and the disk utility announced me that a hardrive is uninitialized

I tried everything to remount the drive back but no success:

erase

first aid

reinstall OS

different recovery software

etc.

The disk utility list shows an internal drive ST3000DM001 Media 4.14 GB

and in the terminal there is a disk0 showing as a 4.1Gb

(I listed below the content )

I tried to erase / format this ST3000DM001 Media but I get the error:

"unable to write to the last block of the device

operation failed"

I am really at a loss, is there any chance to recover this HDD? I can't take it easily out, as the iMac has the LCD glued to the body :(

see below the available info

Thank you in advance for help!

--------------------------------------------------------------------------

/dev/disk0 (internal, physical):

#: TYPE NAME SIZE IDENTIFIER

0: *4.1 GB disk0

/dev/disk1 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 121.3 GB disk1

1: EFI EFI 314.6 MB disk1s1

2: Apple_APFS Container disk2 121.0 GB disk1s2

/dev/disk2 (synthesized):

#: TYPE NAME SIZE IDENTIFIER

0: APFS Container Scheme - +121.0 GB disk2

Physical Store disk1s2

1: APFS Volume System 83.0 GB disk2s1

2: APFS Volume Preboot 47.7 MB disk2s2

3: APFS Volume Recovery 1.0 GB disk2s3

4: APFS Volume VM 2.1 GB disk2s4

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

Try erasing the the disk using Disk Utility and then select the Security Options box and do a secure erase. This will generally inspect every block and map out the bad ones in the directory and make the disk usable again.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

I tried, but it gives me an error

"unable to write to the last block of the device

operation failed"

Plus I don’t want to securely erase, will lose the data 🙁

댓글 달기

Sadly, you really don’t have much of a choice here. Reformatting the drive is your last hope. It’s possible the drive failed.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

I was afraid I would get this answer

I guess I need to take the HDD out and try to reconnect with a different cable and try recover data!?

@marinaxx - Just try reformatting using an external drive which is setup as a bootable drive running the same if not newer macOS version. If that fails then open the system up as at that point you more likely need a new drive.

@danj

I am running High Sierra

I will make a bootable drive with the latest OS and give it a try

If not I have no choice than to take the drive out and try a different approach

Thank you

댓글 달기

귀하의 답변을 추가하세요

marina 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 9

전체 시간: 113