주요 콘텐츠로 건너뛰기

2020년 3월에 출시된 인텔 프로세서가 탑재된 MacBook Air 모델 A2179의 2020년 리프레시 수리 및 분해 정보입니다.

104 질문 전체 보기

Broken display cable connector

After removing the display cable connector, I can no longer snap it back into place. I dont know if the connector attached to the logic bord or display is at fault. Is there anyway to tell? Do I need to purchase a new monitor?

Display

Block Image

https://ibb.co/nRL6p8h

Logicboard

Block Image

https://ibb.co/nwJkB9p

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 2개

@allydelish, We would need better and more closeup images than the link. Use a lot of lighting, preferably a camera with macro functionality and a tripod (stand) to keep it still and a very high F-stop (aperture). The high F-stop requires a lot of light to pass through a tiny aperture, which increases the shutter speed greatly which makes it necessary to use a tripod.

Update your question with new images: Adding images to existing questions.

uploaded new images. looks like it might be the display.

댓글 달기

답변 1개

가장 유용한 답변

@allydelish, It looks like you got the text describing the images backwards? Logic board connector <-> Display connector.

The connector on the logic board looks destroyed, as in will not allow the display to “snap” in. You’ll have two options:

  1. If you have the micro soldering skills and tools, you can replace the connector yourself
  2. Contact a reputable micro soldering shop in your area and pay them to replace the connector for you.

The job of replacing the connector is not a first time DIY job! It requires skill and a lot of fairly expensive tools in order to do it. Hot air rework station, appropriate solder and flux, replacement connector(s), microscope, ++.

해당 답변은 도움이 되었습니까?

점수 1

댓글 7개:

Just to make sure, Are you talking about this image : https://ibb.co/nRL6p8h

This is the closeup of the display. The one with the letters & numbers is on the logicboard.

@allydelish Yes, that’s the one, just me misreading and being a little tired :s

The cable on image https://ibb.co/nwJkB9p is removable. Its a picture of this: MacBook Air 13" (Late 2018-Late 2020) Display Cable|Shopping|SSC|Parts|tROAS390}&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=CjwKCAiAleOeBhBdEiwAfgmXfzabITom8ea6kRULRPa7WGBmMotaMKHNeMZZde6PN8S8Iuc6p8p4oRoCDRwQAvD_BwE

I removed it and took a picture. I was going to replace the cable, but thought Id ask first.

@geirandersen Can you send me a link for the part that would need to be soldered on.

@allydelish If you could find your logic board number, I’ll see what I can find. It’s printed on the logic board itself

댓글 2개 더보기

댓글 달기

귀하의 답변을 추가하세요

Ally 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 4

전체 시간: 74