주요 콘텐츠로 건너뛰기

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1049 질문 전체 보기

I have a non-tappable stripe on my screen

After changing the battery, I now have a barely-visible stripe down the middle (about one fourth from the left), 1 millimetre wide. I can't tap anywhere on that stripe, so for example I can't type the letter E. I also can't turn off the device because I can't "grab" the slider.

I've tried taking the phone apart again and making sure all the connectors are in place.

Help! I don't want to get rid of this device, especially since I JUST changed the battery.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Hmm unfortunately it may sound like the screen was damaged in the process. The fortunate part is that they are pretty cheap and easily installable from some third party companies. When you say stripe is it like a bright line? A pixel or two wide? If that’s the case then definitely LCD or digitizer damage. Last suggestion is to clean the connectors lightly with alcohol if the screen is physically ok as I stated above(no visible lines or cracks). If this doesn’t work then a new screen should fix the issue. Best of luck!

해당 답변은 도움이 되었습니까?

점수 2

댓글 6개:

More like 10 or 20 pixels, but it's hardly visible, and only sometimes. Does that still sound like screen damage?

@ovesh Yes I’d still say screen damage. You could mess with it more and see what causes it to be intermittent but I’m banking on screen damage. Also make sure the plates(covers over the cables) are put back correctly and secured when testing further.

I have an old iPhone SE laying around. I think I'd like to try and see if I can grab the screen from there and replacing it. If I do it without replacing the home button assembly, would the phone as a whole still function? If only for verification to see if it fixes it. If I understand correctly, the only thing that wouldn't work is touch ID, is that correct?

Yeah you’re correct! If you swap the home button into the new (other) screen it’ll function the same as it was before with Touch ID and everything. But for testing purposes it is not needed and will function as a home button but no Touch ID.

I changed the screen... and I still have the exact same problem. So at least I've ruled out that it's a problem with the screen. What else can it be?

댓글 1개 더보기

댓글 달기

귀하의 답변을 추가하세요

Avishai Weissberg 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 46