주요 콘텐츠로 건너뛰기

A sports car made by Toyota from 1992-1995. It has a 1.5 liter inline 4-cylinder with a 5-speed manual or 4-speed automatic transmission.

5 질문 전체 보기

Can I replace rear 6 ohm speakers with 4 ohm?

I'm replacing the rear speakers in my car and the factory ones say 6 ohm. However its much easier to find 4 ohm. I'm looking at some cheap ones on amazon rated for 30rms, the original say 15w on the back so I assume that is the rms for the factory ones. Could this damage the radio (still going to be using the factory stereo) or should I be safe? I don't know anything about speakers.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Hi @carsman248

Not a good idea.

There is a risk of hardware damage to the amplifier in the stereo system. Connecting speakers which have a lower impedance than what the amp is rated for, may cause damage to the amp.

At the very least the sound will be distorted.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Then what should I do? Would it be better to use 8 ohm? Or do I have to find some 6 ohm?

@carsman248

Find some 6 Ohm speakers.

Using 8 Ohm won't be good either.

It mightn't damage the amp but the sound won't be good.

댓글 달기

귀하의 답변을 추가하세요

Maxwell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 10

30일 전: 27

전체 시간: 261