기기를 수리하세요 커뮤니티 상점

Repair guides and support for LED, LCD, HD and other Vizio TVs.

931 질문 전체 보기

옵션

Should I have voltage ( 5 volts ) on power board pin stating ps-on

Vizio tv Mod# M70-C3 when i test pin 3 on power supply board which states ps-on i get 5volts this is without turning tv on, should there be a voltage there even before i turn on tv, tv will not come on dead except once in a while when I press on button indicater light will come on for a few secs then fades away sometimes indicater light will flash then fade away tv still dead, have12 volts stby butt 6v & 3v on pins stating t-con which legend states should be 12v.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

@lakersclippers we need to see your boards and the connectors. Yes, it is possible that you are measuring the right place for the stby voltage, which would be accurate as well. WE can not verify this for sure since we can't see what and where you measure.

One of the concerns I have is the voltages to the T-Con board. Those sound low. Disconnect the T-con board and measure the voltage. Let us know what you got.

It will help if you post some really good pictures of all of your boards etc. with your QUESTION. That way we can see what you see. 기존 질문에 이미지 추가하기

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Eddie Villasenor 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 60