기기를 수리하세요 커뮤니티 상점

Repair guides and support for your Philips TV.

243 질문 전체 보기

옵션

it started to blink 3 times - Philips TV 42PFL6057

Block Image

Block Image

Block Image

Thanks for all the information.

I have the 42PFL6057H/12

After 10 years, it started to blink 3 times and it does not power on.

What is the diode that I have to replace?

I have many photos.

Thanks in advance,

Francisco

Update (05/04/23)

Thanks a lot.

After checking all the diodes, apparently the is failure is in the ZD904 and in the ZD717

Does anyone know what sort of diodes are they?

I send you an attached photo.

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1

댓글 1개:

Thanks a lot for your answers.

I am going to check the diodes tonight.

Can you recommend me any online electronics shop to order the material from Spain/Europe?

의

댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

@franciscorm it may not be a diode but it may be the power board. The 3 blink code is a non-specific code. All it means is that your TV went into Protection mode. Check D603 as the primary suspect. If it checks out okay, you will need to check the other diodes as well.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 6개:

Thanks.

Checking with or without AC current?

의

@franciscorm you can just check for function without powering up the TV.

의

Thanks a lot for your answers.

I am going to check the diodes tonight.

Can you recommend me any online electronics shop to order the material from Spain/Europe?

의

@franciscorm Mouser.com has a European site. They are costly when it comes to shipping, but their components are good quality.

의

Thanks a lot.

After checking all the diodes, apparently the is failure is in the ZD904 and in the ZD717

Does anyone know what sort of diodes are they?

I send you an attached photo.

의

댓글 1개 더보기

댓글 달기

옵션

Thanks a lot.

After checking all the diodes, apparently the is failure is in the ZD904 and in the ZD717

Does anyone know what sort of diodes are they?

I send you an attached photo.

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

Hi!

All the measures are made with the "diode" mode of the multimeter.

*ZD904: The measure is low in comparison with the other zeners. In addition to this, the multimeter "beeps" like checking a fuse.

*ZD717: The measure is low in comparison with the other zeners.

I attach two photos

Block Image

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 11개:

@franciscorm sounds reasonable. Time to replace those diodes.

의

Thanks, but, how do you know what sort of model are they in order to buy it?

의

@franciscorm that is a tough one without having the schematic which identifies the components. Yours appear to have a glass body. We know that lower wattage zeners usually have glass bodies, higher wattage ones have the common black body. See if you can take a voltage measurement on the Zener diode adjacent to the one you need to replace.

의

Diode mode in the multimeter:

ZD905➡️699

ZD902➡️669

ZD601➡️682

ZD717➡️110

ZD903➡️526

ZD904➡️0

D801➡️469

ZD602➡️538

D603➡️538

D950➡️180

D951➡️180

D901➡️527

D906➡️529

의

@oldturkey03 If ZD717 and ZD904 are the ones who fail, ¿which are the similar ones in order to know what to buy?

Maybe the "couple" of the ZD904 is the ZD 903, but for the ZD 717...

Thanks in advance 😀

의

댓글 6개 더보기

댓글 달기

귀하의 답변을 추가하세요

Francisco RM 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 33

전체 시간: 278